Scarlett Solo 3rd Gen | Focusrite Downloads (2024)

FAQs

Do I need to download Focusrite Control? ›

If you have an interface that uses Mix Control or Focusrite Control, the driver will be installed at the same time if it's needed. This means you only need to download the control software. These units include: All Scarlett 3rd Generation interfaces.

Easy Start gets you set up in minutes. All the software you need is in the box. There's no faster way to make studio quality recordings than Scarlett.

This applies to Scarletts, Saffires, Claretts and External Preamps (ISA, OctoPre, etc.) We suggest leaving them on during sessions but turning it off when the studio is not in use.

Several Focusrite products are bundled with Ableton's Live Lite software. Ableton Live Lite is not time-limited, you can save and export your work, and all of Live's fundamental tools and features are included: Fast, intuitive workflow based on unique Session and Arrangement Views.

Most external audio interfaces use either USB, Thunderbolt or Firewire to connect to your computer. A USB interface is used for this example. Download and install any available software drivers for your audio interface, making sure they are up to date and supported on your operating system.

Download and install the Scarlett Solo drivers (Windows only). Follow all on-screen instructions. When the installation is complete, restart your computer. After restart, connect the Scarlett Solo to your computer with the USB cable supplied.

To confirm - the 'bus-powered' Scarletts (the Solo, 2i2 and 2i4) do not work standalone, they must be connected to a computer.

All Focusrite audio interfaces include rock-solid ASIO drivers to ensure trouble-free, low-latency performance. Connecting to your Windows PC requires just one USB cable and additional PSU (power supply unit).

Condenser microphones require power to work, on Focusrite interfaces when you press the '48V' button, phantom power (48V) is sent to the XLR microphone input for that input (or inputs). 48V Phantom power is not sent to any 1/4” jack inputs, these are used for line or instrument inputs.

The Scarlett Solo is fitted with a “Direct Monitoring” option, which overcomes this problem. Setting the front panel DIRECT MONITOR switch to ON will route your input signals directly to the Scarlett Solo's headphone and main monitor outputs.

What is the best model of Focusrite Scarlett? ›

Winner — Best Audio Interface

Scarlett 4th Gen has won the 2024 Sound On Sound award for best audio interface.

Solo's amped-up headphone output with independent volume control drives your favourite headphones loud and clear. Need software? The Hitmaker Expansion software bundle includes all the tools you need to record, produce and release your tracks.

Yes, the Scarlett Solo (3rd Gen) comes with a USB C to A cable in the box. … Hi, Yes the interface does have 48V phantom power which can be used to power condenser …

Focusrite Control is the standalone software where you will make various changes with the Focusrite interfaces. This includes changing clock sources, routing, sample rate, and, depending on your device, pairing with your iOS device. When you launch Focusrite Control, there are three windows you'll be working with.

Once the software installation (if necessary) is complete, simply connect the Scarlett 2i2 to your computer using the USB cable provided. Note that Scarlett 2i2 is a USB 2.0 device, and thus the USB connection requires a USB 2.0+ compliant port on your computer. It will not operate correctly with USB 1.0/1.1 ports.

3rd Gen: Scarlett Solo | Scarlett 2i2 | Scarlett 4i4

Yes, you need Focusrite Control for these devices.

Ensure the audio interface is compatible with your computer's operating system (e.g., Windows, macOS) and your preferred digital audio workstation (DAW) software. Some interfaces may require specific drivers, so check for driver availability and compatibility to ensure smooth operation.